NEW PRODUCTS – Silicone Keycap Molds – MX Compatible Switches
First up, the Caps Lock Mold!
4 x 1U and 1 x 1.5U “Caps Lock” Silicone Keycap Molds – MX Compatible Switches
If you love to customize, why not level up your DIY keeb-makin’ skills and craft your own set of bespoke ‘caps with this keycap mold that has four “1U R4” (e.g. single square escape-key-like) molds and one 1.5U Caps Lock Keycap Molds.
We recommend UV-curable resin, yes you’ll need a UV lamp, but it’s worth the investment: two-part resin is much messier and hard to cure if the temperature and humidity aren’t just right. Check out this video for a great little tutorial on how to DIY your own custom keycaps.
Once molded, the keycaps will fit on any Cherry MX-compatible keyswitch. Comes with one two-piece mold that has four 1U molds and one 1.5U mold.
Next up, the “Tab” Mold!
4 x 1U and 1 x 1.25U “Tab” Silicone Keycap Molds – MX Compatible Switches
If you love to customize, why not level up your DIY keeb-makin’ skills and craft your own set of bespoke ‘caps with this keycap mold that has four “1U R2” (e.g. single square escape-key-like) molds and one 1.25U Tab Keycap Molds.
We recommend UV-curable resin, yes you’ll need a UV lamp, but it’s worth the investment: two-part resin is much messier and hard to cure if the temperature and humidity aren’t just right. Check out this video for a great little tutorial on how to DIY your own custom keycaps.
Once molded, the keycaps will fit on any Cherry MX-compatible key switch. Comes with one two-piece mold that has four 1U molds and one 1.5U mold.
Following that with the honkin’ Space Bar Mold
2 x 2.25U, 1 x 2.75U, and Space Bar Keycap Mold – MX Compatible Switches
If you love to customize, why not level up your DIY keeb-makin’ skills and craft your own set of bespoke ‘caps with this keycap mold that has two 2.25U molds (Left Shift and Enter), a 2.75U mold (Right Shift), and one looooooooooooongboi 6.25U Space Bar Keycap Mold.
We recommend UV-curable resin, yes you’ll need a UV lamp, but it’s worth the investment: two-part resin is much messier and hard to cure if the temperature and humidity aren’t just right. Check out this video for a great little tutorial on how to DIY your own custom keycaps.
Once molded, the keycaps will fit on any Cherry MX-compatible key switch. Comes with one two-piece mold that has two 2.25U molds, one 2.75U mold, and one 6.25U mold.
We’ve got the “Ctrl” Mold next!
3 x 1U and 2 x 1.25U “Ctrl” Silicone Keycap Molds – MX Compatible Switches
If you love to customize, why not level up your DIY keeb-makin’ skills and craft your own set of bespoke ‘caps with this keycap mold that has three “1U R1” (e.g. single bottom row key) molds and two 1.25U Ctrl Keycap Molds.
We recommend UV-curable resin, yes you’ll need a UV lamp, but it’s worth the investment: two-part resin is much messier and hard to cure if the temperature and humidity aren’t just right. Check out this video for a great little tutorial on how to DIY your own custom keycaps.
Once molded, the keycaps will fit on any Cherry MX-compatible key switch. Comes with one two-piece mold that has three 1U molds and two 1.25U molds.
And now, the “Esc” mold!
4 x 1U and 1 x 2U “Esc” Silicone Keycap Molds – MX Compatible Switches
If you love to customize, why not level up your DIY keeb-makin’ skills and craft your own set of bespoke ‘caps with this keycap mold that has four “1U R1” (e.g. single function-key-like) molds and one 2U Esc Keycap Molds. Depending on your keyboard, the key could also be used for Enter, Backspace, etc.
We recommend UV-curable resin, yes you’ll need a UV lamp, but it’s worth the investment: two-part resin is much messier and hard to cure if the temperature and humidity aren’t just right. Check out this video for a great little tutorial on how to DIY your own custom keycaps.
Once molded, the keycaps will fit on any Cherry MX-compatible key switch. Comes with one two-piece mold that has four 1U molds and one 2U mold.
Saving the cutest for the finale, the Kitty Paw Mold!
Kitty Paw Silicone Keycap Molds – MX Compatible Switches
If you love our Kitty Paw Keycaps and love to customize, why not level up your DIY keeb-makin’ skills and craft your own set of bespoke ‘caps with these Kitty Paw Keycap Molds. If your kitty’s paws are going to walk all over your keyboard, you at least want to be able to walk all over kitty paws.
We recommend UV-curable resin, yes you’ll need a UV lamp but it’s worth the investment: two-part resin is much messier and hard to cure if the temperature and humidity isn’t just right. Check out this video for a great little tutorial on how to DIY your own custom keycaps.
Once molded, the key caps will fit on any Cherry MX-compatible keyswitch. Comes with one two-piece mold that has 6 spots.
from Adafruit Industries – Makers, hackers, artists, designers and engineers! https://ift.tt/3rLOw5F
via IFTTT
Комментариев нет:
Отправить комментарий