Add some protection to your Matix projects with this back cover shared by twistedgeek on Thingiverse:
A back cover for the Adafruit Matrix Panel 32×64 as seen here – https://www.adafruit.com/product/2278
The back cover protects the wires and matrix portal board in the back of the matrix panel.
The panel was included in the October 2020 Adabox 016 kit here – https://www.adafruit.com/product/4812
Make sure it is for the 32×64 panel RGB matrix 4mm pitch which measures 255mm x 127mm.
To attach onto the matrix panel use (6) M3x16 screws.
The print has a slot for the control board to extend out the one side.
About a 24 hour print on normal quality.
Download the files and learn more
Every Thursday is #3dthursday here at Adafruit! The DIY 3D printing community has passion and dedication for making solid objects from digital models. Recently, we have noticed electronics projects integrated with 3D printed enclosures, brackets, and sculptures, so each Thursday we celebrate and highlight these bold pioneers!
Have you considered building a 3D project around an Arduino or other microcontroller? How about printing a bracket to mount your Raspberry Pi to the back of your HD monitor? And don’t forget the countless LED projects that are possible when you are modeling your projects in 3D!
from Adafruit Industries – Makers, hackers, artists, designers and engineers! https://ift.tt/3hxmVzY
via IFTTT
Комментариев нет:
Отправить комментарий