Browse through all that’s new here!
NEW PRODUCTS THIS WEEK
Adafruit Ultimate GPS with USB – 66 channel w/10 Hz updates
The Ultimate GPS module you know and love has a glow-up to let it be easily used with any computer, not just microcontrollers! With the built in USB-to-Serial converter, you can now plug-n-play the Ultimate GPS into your computer, laptop, embedded Linux computer, and more. Power and transport data over any micro USB cable, with handy on-board indicator LEDs that let you know fix status and whether data is being received & transmitted.
Adafruit Ultimate GPS HAT for Raspberry Pi A+/B+/Pi 2/3/Pi 4 – Mini Kit
It’s 10PM, do you know where your Raspberry Pi is? If you had this GPS HAT, you would! This new HAT from Adafruit adds our celebrated Ultimate GPS on it, so you can add precision time and location to your Raspberry Pi Model Pi 3, Pi Zero, A+, B+, or Pi 2, 3, & 4
Woven USB Cable with USB Type A to Right Angle USB Type C – Black 1 meter long
Some days we’re feeling extra fancy here at the ‘fruit warehouse, and we have a big soft spot for woven fabric cables. Like, peep this fully reversible pink/purple Blinka-inspired cable or this mithril-like 3-in-1 Sync and Charge cable. Our latest addition to the collection is this 1 meter long Adafruit Black Woven USB Cable with USB Type A to Right Angle USB Type C.
USB C is the latest industry-standard connector for transmitting data and power. Like Lightning and MagSafe cables, USB C has no up or down orientation, so this right angle connector can curve to the left or the right.
Works great with any USB 1 or 2.0 device or cable that has a USB C port.
Black Windowed Lamp R4 Keycap for MX Compatible Switches
These stark and elegant Black Windowed Lamp R4 Keycaps are made of opaque black plastic with a small cutout in the south-center edge that wraps around the top and bottom. The cut-out has a clear plastic window to allow an LED installed under the switch to glow through. These are somewhat rare to find, but they have a little bit of the je ne sais quoi to your keeb or macropad build
Lithium Ion Polymer Battery – 3.7V 10050mAh (10 Ah)
Lithium ion polymer (also known as ‘lipo’ or ‘lipoly’) batteries are thin, light, and powerful. The output ranges from 4.2V when completely charged to 3.7V. This battery has a capacity of 10,050mAh (a.k.a 10 Ah) for a total of about 37 Wh.
SHT30 Temperature And Humidity Sensor – Wired Enclosed Shell
The SHT30-D sensor has an excellent ±2% relative humidity and ±0.5°C accuracy for most uses. Unlike earlier SHT sensors, this sensor has a true I2C interface.
Mini Panel Mount USB Trackpad with Two Buttons
Add a cool touch interface with your project with this Panel Mount USB Trackpad with Two Buttons that is super easy to use and interface with. Simply plug it into your computer (desktop of single-board-linux type), it will appear as an external HID trackpad with left and right buttons.
Perfect for use with an embedded computer setup that needs a pointer but you don’t have a touchscreen, and not enough space for a mouse.
Mini Panel Mount USB Trackball with Three Buttons
Add a rolling interface with your project with this Panel Mount USB Trackball with Three Buttons that is super easy to use and interface with. Simply plug it into your computer (desktop of single-board-linux type), it will appear as an external mouse with left and right buttons plus a middle button.
SparkFun Qwiic pHAT v2.0 for Raspberry Pi – STEMMA QT / Qwiic
The SparkFun Qwiic pHAT V2.0 for Raspberry Pi provides you with the quickest and easiest way to enter into SparkFun’s Qwiic or STEMMA QT ecosystem while still using that Raspberry Pi that you’ve come to know and love. The Qwiic pHAT connects the I2C bus (GND, 3.3V, SDA, and SCL) on your Raspberry Pi to an array of Qwiic/QT connectors on the HAT. Since this system allows for daisy-chaining boards with different addresses, you can plug in as many sensors as you’d like!
Blue Anodized Aluminum Bumper Feet – Pack of 2
Keep your electronics from going barefoot, and give them sleek cyberpunk metal feet! These aluminum bumpers are originally designed for keyboard enclosures that are made of anodized aluminum with a black rubber nubbin embedded inside for no-slip support. They’re so cool looking we figure they could be your new favorite accessory.
Use the included M4-threaded machine screws to bolt onto the bottom of any electronic kit or device and add a look of cool Neo-Tokyo or Night City fashion. You could also skip the screw and use a double-sided foam or tape to stick it on.
Comes in a pack of 2 feet pieces. One bumper is approx 22mm in diameter and 11mm tall.
Learn more! Also available in Silver, Green, Purple, Red, Black, and Gray!
Stay in the loop at Adafruit.com/New!
Want to get this info beamed straight into your inbox?
New nEw NEWs From Adafruit is an email newsletter sent once a week to subscribers only.
It features new products, special offers, exciting original content, and more.
Sign-up for the Adafruit weekly Newsletter here: https://www.adafruit.com/newsletter
from Adafruit Industries – Makers, hackers, artists, designers and engineers! https://ift.tt/3dGq0wY
via IFTTT
Комментариев нет:
Отправить комментарий