from MSNBC Top Stories https://ift.tt/q4ojN5u
via IFTTT
I love this vertical-drawer cabinet for storing drill, rotary tool, and end mill bits. The video is in Japanese but there are English subtitles.
This design could be a space-saving solution for a lot of tools and accessories that can be organized and stored this way.
I love this vertical-drawer cabinet for storing drill, rotary tool, and end mill bits. The video is in Japanese but there are English subtitles.
This design could be a space-saving solution for a lot of tools and accessories that can be organized and stored this way.
Well here’s a Pi project you thought you’d never see. Jeff Geerling created a storage array of 60 20TB hard drives, aka over a petabyte, controlled by a Raspberry Pi 4.
It was just an experiment to see if the Pi had what it took (and to have an excuse to use one of 45Drive’s Storinator XL 60-bay server).
So, did it work? Sorta. Kinda. At least in a proof-of-concept sort of way.
Well here’s a Pi project you thought you’d never see. Jeff Geerling created a storage array of 60 20TB hard drives, aka over a petabyte, controlled by a Raspberry Pi 4.
It was just an experiment to see if the Pi had what it took (and to have an excuse to use one of 45Drive’s Storinator XL 60-bay server).
So, did it work? Sorta. Kinda. At least in a proof-of-concept sort of way.
In this 25-minute video, engineer Jeremy Fielding does an impressive job of clearly and cleverly explaining and demonstrating how electromagnets, relays, contactors, solenoids, and reed switches work.
This is a great video for anyone who’s relatively new to electronics and wants to understand the science and mechanics behind these switching devices.
In this 25-minute video, engineer Jeremy Fielding does an impressive job of clearly and cleverly explaining and demonstrating how electromagnets, relays, contactors, solenoids, and reed switches work.
This is a great video for anyone who’s relatively new to electronics and wants to understand the science and mechanics behind these switching devices.
MIT shares how the auditory system is shaped in the womb.
In the new study, the researchers showed that exposing a computational model of the human auditory system to a full range of frequencies from the beginning led to worse generalization performance on tasks that require absorbing information over longer periods of time — for example, identifying emotions from a voice clip. From the applied perspective, the findings suggest that babies born prematurely may benefit from being exposed to lower-frequency sounds rather than the full spectrum of frequencies that they now hear in neonatal intensive care units, the researchers say.
MIT shares how the auditory system is shaped in the womb.
In the new study, the researchers showed that exposing a computational model of the human auditory system to a full range of frequencies from the beginning led to worse generalization performance on tasks that require absorbing information over longer periods of time — for example, identifying emotions from a voice clip. From the applied perspective, the findings suggest that babies born prematurely may benefit from being exposed to lower-frequency sounds rather than the full spectrum of frequencies that they now hear in neonatal intensive care units, the researchers say.
I love Carl Bugeja’s various tiny robot experiments, especially his development of PCB-based motors.
In this video, he shows off the refinements he’s made to his two-wheeled PCB-based bot.
I love Carl Bugeja’s various tiny robot experiments, especially his development of PCB-based motors.
In this video, he shows off the refinements he’s made to his two-wheeled PCB-based bot.
And you already thought the human brain was staggering complex. According to scientists working at the Blue Brain Project in Switzerland, it’s even more complex than we thought.
When stimulated, virtual neurons would form a clique, with each neuron connected to another in such a way that a specific geometric object would be formed. A large number of neurons would add more dimensions, which in some cases went up to 11. The structures would organize around a high-dimensional hole the researchers called a “cavity”. After the brain processed the information, the clique and cavity vanished.
The researcher Ran Levi detailed how this process is working:
“The appearance of high-dimensional cavities when the brain is processing information means that the neurons in the network react to stimuli in an extremely organized manner. It is as if the brain reacts to a stimulus by building then razing a tower of multi-dimensional blocks, starting with rods (1D), then planks (2D), then cubes (3D), and then more complex geometries with 4D, 5D, etc. The progression of activity through the brain resembles a multi-dimensional sandcastle that materializes out of the sand and then disintegrates.”
The significance of the discovery lies in allowing us greater understanding into “one of the fundamental mysteries of neuroscience – the link between the structure of the brain and how it processes information,” elaborated Kathryn Hess in an interview with Newsweek.
The scientists look to use algebraic topography to study the role of “plasticity” which is the process of strengthening and weakening of neural connections when stimulated – a key component in how our brains learn. They see further application of their findings in studying human intelligence and formation of memories.
Fun video for Superman superfans from DC Animated History on YouTube.
Look! Up in the sky! It’s a bird! It’s a Plane! It’s Superman!
What has Clark Kent, a.k.a. Superman been up to all these years? Whether it’s joining the Justice League or saving the world, Superman always fights for those who can’t fight for themselves.
Fun video for Superman superfans from DC Animated History on YouTube.
Look! Up in the sky! It’s a bird! It’s a Plane! It’s Superman!
What has Clark Kent, a.k.a. Superman been up to all these years? Whether it’s joining the Justice League or saving the world, Superman always fights for those who can’t fight for themselves.
This recent post from Joe George over at Tor.com makes a very good case that actor Vincent Price was at his best when portraying evil genius types.
In a career that stretched from 1938 to 1995, Vincent Price captivated audiences with a debonair manner that brought smooth sophistication to his evil ways. Although he certainly played heroic, and even romantic roles at times, Price excelled as an evil genius. His elegant presence and rich voice brought a new and impressive level of menace to the devilish tortures his characters devised.
If we look at Price’s six best villain performances, we can find plenty of moments that surely set the standard for modern horror movie geniuses of every stripe…
This recent post from Joe George over at Tor.com makes a very good case that actor Vincent Price was at his best when portraying evil genius types.
In a career that stretched from 1938 to 1995, Vincent Price captivated audiences with a debonair manner that brought smooth sophistication to his evil ways. Although he certainly played heroic, and even romantic roles at times, Price excelled as an evil genius. His elegant presence and rich voice brought a new and impressive level of menace to the devilish tortures his characters devised.
If we look at Price’s six best villain performances, we can find plenty of moments that surely set the standard for modern horror movie geniuses of every stripe…
Browse through all that’s new here!
RP-SMA to w.FL / MHF3 / IPEX3 Adapter: Most antennas have SMA or RP-SMA connectors on them, how are you going to connect them to your little RF module? This little cable will bridge the two!
This adapter cable is super handy for anyone doing RF work with modules that have w.FL connectors. It has a tiny MHF3/ IPEX3 / wFL / w.FL connector on the end – not a uFL connector – on one end, and an RP-SMA plug on the other.
Surface Mount Rotary Encoder – EC11J: For projects that need a rotary encoder but need to keep it single-sided or need to avoid interrupting traces or devices on the other side, here’s an all-SMT rotary encoder! It’s a high-quality 30-detents encoder from Alps, with detents and a nice feel. There’s a nice smooth bushing for placement in a box.
Pogo Pin Probe Clip – 6 Pins with 2.54mm / 0.1″ Pitch: The Pogo Pin Probe Clip with 6 pins in a 2.54 / 0.1″ pitch spacing is a great way to test and connect with pin-point accuracy without soldering! It’s sort of like an alligator clip with an array of built-in springy pogo pins – so you can connect to a PCB with classic 0.1″ spaced pad holes, without soldering or a special adapter cable.
Pogo Pin Probe Clip – 2×5 1.27mm Pitch SWD: The Pogo Pin Probe Clip with 2×5 0.05″ pitch SWD spacing is a great way to test and connect with pin-point accuracy without soldering! It’s sort of like an alligator clip with an array of built-in springy pogo pins – so you can connect to a PCB with classic ‘SWD’ pad holes, without soldering or a special adapter cable.
New Products 5/25/2022 Feat. Pogo Pin Probe Clip – 2×5 1.27mm Pitch SWD!
Stay in the loop at Adafruit.com/New!
Want to get this info beamed straight into your inbox?
New nEw NEWs From Adafruit is an email newsletter sent once a week to subscribers only.
It features new products, special offers, exciting original content, and more.
Sign-up for the Adafruit weekly Newsletter here: https://www.adafruit.com/newsletter
New nEw NEWs From Adafruit is an email newsletter sent out once a week to subscribers only. It features new products, special offers, exciting original content, and more. Sign-up NOW for the Adafruit weekly Newsletter here: https://www.adafruit.com/newsletter
Browse through all that’s new here!
RP-SMA to w.FL / MHF3 / IPEX3 Adapter: Most antennas have SMA or RP-SMA connectors on them, how are you going to connect them to your little RF module? This little cable will bridge the two!
This adapter cable is super handy for anyone doing RF work with modules that have w.FL connectors. It has a tiny MHF3/ IPEX3 / wFL / w.FL connector on the end – not a uFL connector – on one end, and an RP-SMA plug on the other.
Surface Mount Rotary Encoder – EC11J: For projects that need a rotary encoder but need to keep it single-sided or need to avoid interrupting traces or devices on the other side, here’s an all-SMT rotary encoder! It’s a high-quality 30-detents encoder from Alps, with detents and a nice feel. There’s a nice smooth bushing for placement in a box.
Pogo Pin Probe Clip – 6 Pins with 2.54mm / 0.1″ Pitch: The Pogo Pin Probe Clip with 6 pins in a 2.54 / 0.1″ pitch spacing is a great way to test and connect with pin-point accuracy without soldering! It’s sort of like an alligator clip with an array of built-in springy pogo pins – so you can connect to a PCB with classic 0.1″ spaced pad holes, without soldering or a special adapter cable.
Pogo Pin Probe Clip – 2×5 1.27mm Pitch SWD: The Pogo Pin Probe Clip with 2×5 0.05″ pitch SWD spacing is a great way to test and connect with pin-point accuracy without soldering! It’s sort of like an alligator clip with an array of built-in springy pogo pins – so you can connect to a PCB with classic ‘SWD’ pad holes, without soldering or a special adapter cable.
New Products 5/25/2022 Feat. Pogo Pin Probe Clip – 2×5 1.27mm Pitch SWD!
Stay in the loop at Adafruit.com/New!
Want to get this info beamed straight into your inbox?
New nEw NEWs From Adafruit is an email newsletter sent once a week to subscribers only.
It features new products, special offers, exciting original content, and more.
Sign-up for the Adafruit weekly Newsletter here: https://www.adafruit.com/newsletter
New nEw NEWs From Adafruit is an email newsletter sent out once a week to subscribers only. It features new products, special offers, exciting original content, and more. Sign-up NOW for the Adafruit weekly Newsletter here: https://www.adafruit.com/newsletter
On Tabletop Time, the team came together to create a cyberpunk bar for their ongoing REBOOT.EXE roleplaying game.
I love the way they painted everything so drab and monochromatic, with pops of bright color and light effects to create the mood of a really dark and grimy urban bar in a cyberpunk world.
We love the fun colors on this print by B0NK3R5 up on Thingiverse.
To hold a fish tank hose on a big orange 5 gallon bucket.
Remixed to better fit a big orange bucket from “the big orange hardware store”; it now properly grips one of the rings near the top.I fixed the slanted hook before publishing.
My first remix.
tim1290 shares:
Steps to complete:
Print two shelfs and 4 feet
Get and cut either wood or aluminium 14mm diameter.
Slide each for poles into each shelf (is tight on purpose)
Screw screws into each corner of the shelf
download the files on: https://www.thingiverse.com/thing:5342091
Every Thursday is #3dthursday here at Adafruit! The DIY 3D printing community has passion and dedication for making solid objects from digital models. Recently, we have noticed electronics projects integrated with 3D printed enclosures, brackets, and sculptures, so each Thursday we celebrate and highlight these bold pioneers!
Have you considered building a 3D project around an Arduino or other microcontroller? How about printing a bracket to mount your Raspberry Pi to the back of your HD monitor? And don’t forget the countless LED projects that are possible when you are modeling your projects in 3D!
LIVE CHAT IS HERE! http://adafru.it/discord
Adafruit on Instagram: https://www.instagram.com/adafruit
Shop for parts to build your own DIY projects http://adafru.it/3dprinting
3D Printing Projects Playlist:
3D Hangout Show Playlist:
Layer by Layer CAD Tutorials Playlist:
Timelapse Tuesday Playlist:
Connect with Noe and Pedro on Social Media:
Noe’s Twitter / Instagram: http://instagram.com/ecken
Pedro’s Twitter / Instagram: http://instagram.com/videopixil
tim1290 shares:
Steps to complete:
Print two shelfs and 4 feet
Get and cut either wood or aluminium 14mm diameter.
Slide each for poles into each shelf (is tight on purpose)
Screw screws into each corner of the shelf
download the files on: https://www.thingiverse.com/thing:5342091
Every Thursday is #3dthursday here at Adafruit! The DIY 3D printing community has passion and dedication for making solid objects from digital models. Recently, we have noticed electronics projects integrated with 3D printed enclosures, brackets, and sculptures, so each Thursday we celebrate and highlight these bold pioneers!
Have you considered building a 3D project around an Arduino or other microcontroller? How about printing a bracket to mount your Raspberry Pi to the back of your HD monitor? And don’t forget the countless LED projects that are possible when you are modeling your projects in 3D!
LIVE CHAT IS HERE! http://adafru.it/discord
Adafruit on Instagram: https://www.instagram.com/adafruit
Shop for parts to build your own DIY projects http://adafru.it/3dprinting
3D Printing Projects Playlist:
3D Hangout Show Playlist:
Layer by Layer CAD Tutorials Playlist:
Timelapse Tuesday Playlist:
Connect with Noe and Pedro on Social Media:
Noe’s Twitter / Instagram: http://instagram.com/ecken
Pedro’s Twitter / Instagram: http://instagram.com/videopixil
In this Tested video, Adam Savage spends nearly 30 minutes going through many different types of sanding technologies, from papers to rasps to sanding machines.
As always, there are great pearls of insight and wisdom here, like:
Sanding is about removing material. Going up the ladder of finer and finer grits is about removing evidence of removing material.
Chiharu Shiota uses string to represent life and relationships. Learn more about Chiharu Shiota’s history, life and work in this video from Louisiana Channel on vimeo:
Strings, which now have become a signature for the artist, were her escape from the canvas: “I started to make three-dimensional pictures with strings.” Feeling more connected to the string as a material than paint, Shiota started doing performance and installation art. “I create in space,” she says about her method and continues: “When you weave string, it’s a communication with the space. It’s like painting a picture in the air.” Often the strings are intertwined but also connected to human objects such as shoes, suitcases, and old photographs that she finds at flea markets and antique shops.
From the GitHub release page:
This is CircuitPython 7.3.0, the latest minor revision of CircuitPython, and is a new stable release.
zlib
module support. gzip
module will be added later.wrap
and wrap_target
support.keypad
: scan keystates immediately on creation.floppyio
, used in conjunction with a library.TileGrid
bitmap to be changed.f
-strings available in all builds.Firmware downloads are available from the downloads page on circuitpython.org. The site makes it easy to select the correct file and language for your board.
To install follow the instructions in the Welcome to CircuitPython! guide. To install the latest libraries, see this page in that guide.
Try the latest version of the Mu editor for creating and editing your CircuitPython programs and for easy access to the CircuitPython serial connection (the REPL).
Documentation is available in readthedocs.io.
CircuitPython has a number of “ports” that are the core implementations for different microcontroller families. Stability varies on a per-port basis. As of this release, these ports are consider stable:
atmel-samd
: Microchip SAMD21, SAMx5xcxd56
: Sony Spresenseespressif
: Espressif ESP32-S2nrf
: Nordic nRF52840, nRF52833raspberrypi
: Raspberry Pi RP2040stm
: ST STM32F4 chip familyThese ports are considered alpha and will have bugs and missing functionality:
broadcom
: Raspberry Pi boards such as RPi 4, RPi Zero 2Wespressif
: ESP32-S3, ESP32-C3litex
: fomumimxrt10xx
: NXP i.MX RT10xxxstm
: ST non-STM32F4 chip familiesThis release is a relabeling of 7.3.0-rc.2 and is otherwise the same as that release.
Thank you to all who used, tested, and contributed since 7.2.5, including the contributors above, and many others on GitHub and Discord. Join us on the Discord chat to collaborate.
To celebrate the 25th anniversary of Luc Besson’s innovative and over-the-top sci-fi cult classic, The Fifth Element, the film will be appearing in theaters for two special screenings, Sunday, June 26, and Wednesday, June 29.
In addition to the film, the screenings will also include outtakes and an interview with the director.
Also on Adafruit:
Milla Jovovich Tells the Story Behind Her Character LeeLoo from “The Fifth Element” #cyberpunk
Cyberpunk Fashion and Jean Paul Gaultier’s 1995 “Cyber” Show #cyberpunk
Neat video from the Science Channel about how spiral staircases are built.
Spiral stairs were once part of a strategy to defend the towers of medieval castles. See how they’re made today!
Neat video from the Science Channel about how spiral staircases are built.
Spiral stairs were once part of a strategy to defend the towers of medieval castles. See how they’re made today!
One of the most important facets of a city is it’s public transportation system. Learn all about transit and the only borough on the continent from the New York Transit Museum’s Grand Central Terminal Gallery, via Gothamist:
Before City Island voted to become part of New York City in 1895, and before it was consolidated into the Bronx in 1898, the area relied on a horse-drawn railroad — a trolley car that rode on rails and was pulled by horses — to connect to the Bartow station of the Harlem River and Port Chester Railroad. But the Interborough Rapid Transit Company (IRT), which built New York’s first subway line in 1904, was focused on using newer technologies to improve commutes.
So around the same time they were building the subway in Manhattan, the IRT took over this Bronx railway, which was called the Pelham Park and City Island Railroad. A few years later, they decided to substitute the horse railroad for NYC’s first monorail. The Flying Lady — so called because of its “long, cigar-shaped yellow car” — could fit 40 people, and took only a few minutes between stops instead of the 40-plus minutes by horse. More than 100 people came out for its inaugural ride on July 16th, 1910.
Things did not go well.
Read more from Gothamist and get gallery info here
One of the most important facets of a city is it’s public transportation system. Learn all about transit and the only borough on the continent from the New York Transit Museum’s Grand Central Terminal Gallery, via Gothamist:
Before City Island voted to become part of New York City in 1895, and before it was consolidated into the Bronx in 1898, the area relied on a horse-drawn railroad — a trolley car that rode on rails and was pulled by horses — to connect to the Bartow station of the Harlem River and Port Chester Railroad. But the Interborough Rapid Transit Company (IRT), which built New York’s first subway line in 1904, was focused on using newer technologies to improve commutes.
So around the same time they were building the subway in Manhattan, the IRT took over this Bronx railway, which was called the Pelham Park and City Island Railroad. A few years later, they decided to substitute the horse railroad for NYC’s first monorail. The Flying Lady — so called because of its “long, cigar-shaped yellow car” — could fit 40 people, and took only a few minutes between stops instead of the 40-plus minutes by horse. More than 100 people came out for its inaugural ride on July 16th, 1910.
Things did not go well.
Read more from Gothamist and get gallery info here
In this Project Farm video, Todd tests out 15 brands of everyday carry folding knives: Fallkniven, Benchmade, Gerber, Victorinox, Kershaw, Cold Steel, Kizer, CRKT Fossil, Leatherman Skeletool, Milwaukee, DeWalt, COAST, Kingmax, Vulcan, Master USA.
In the end, the expensive Benchmade ($170) performed best, but the Kizer ($69) and Kershaw ($87) also showed impressive performance.
The surprise was the Kingmax (at only $13). It performed decently and includes other useful features, like a window break and seat belt cutter.
In this Project Farm video, Todd tests out 15 brands of everyday carry folding knives: Fallkniven, Benchmade, Gerber, Victorinox, Kershaw, Cold Steel, Kizer, CRKT Fossil, Leatherman Skeletool, Milwaukee, DeWalt, COAST, Kingmax, Vulcan, Master USA.
In the end, the expensive Benchmade ($170) performed best, but the Kizer ($69) and Kershaw ($87) also showed impressive performance.
The surprise was the Kingmax (at only $13). It performed decently and includes other useful features, like a window break and seat belt cutter.
Martina of NerdForge wanted to know just how radically different the results might be in building a fantasy house diorama that took 1 hr, 10 hrs, and 100 hrs.
As you might imagine, the 100-hour diorama is amazing and the clear winner, but the results on the 10-hour house are pretty decent, too.
The 1-hr house? You can’t really complete a fantasy house diorama in an hour. She did manage to get it built, but barely had time to splash on some paint.
Martina of NerdForge wanted to know just how radically different the results might be in building a fantasy house diorama that took 1 hr, 10 hrs, and 100 hrs.
As you might imagine, the 100-hour diorama is amazing and the clear winner, but the results on the 10-hour house are pretty decent, too.
The 1-hr house? You can’t really complete a fantasy house diorama in an hour. She did manage to get it built, but barely had time to splash on some paint.
In this DiResta video, Jimmy builds a model of the Eiffel Tower out of wooden craft sticks.
The vid is basically an ad for Titebond Quick & Thick no-run glue, but it’s a cool build that is satisfying to watch and there are some useful tips in here, like how he turns an image from the internet into a template for the tower and using zip-ties to clamp parts together for gluing.
In this DiResta video, Jimmy builds a model of the Eiffel Tower out of wooden craft sticks.
The vid is basically an ad for Titebond Quick & Thick no-run glue, but it’s a cool build that is satisfying to watch and there are some useful tips in here, like how he turns an image from the internet into a template for the tower and using zip-ties to clamp parts together for gluing.
After more than three years on Mars, NASA’s InSight mission may come to an end. Here’s more from MOTHERBOARD:
Just weeks after the lander’s seismometer recorded a magnitude 5 “marsquake”—the biggest earthquake ever detected on another planet—mission operators announced that dust buildup on the mission’s solar panels is slowly starving InSight of power. Unless the lander is graced by a fortuitous dust devil that blows some of the crud off the panels, InSight will end its science operations this summer and will be officially dead by the end of the year.
From Gizmodo:
In 1996, a rock from space was found in southwestern Egypt’s Great Sand Sea. The rock was odd, even by extraterrestrial standards, and a team of researchers studying the rock’s chemistry now propose that it came from a supernova—the brilliant, explosive collapse of a star.
The rock is named Hypatia, after a 4th-century Egyptian mathematician. Based on the pattern of 15 elements in a 3-gram sample of the stone, a team of researchers suspects Hypatia came from well beyond our stellar neighborhood, and emerged from the gas and dusty detritus that followed a distant star’s explosion. Their research is published in the journal Icarus.
The researchers think Hypatia came from a Type Ia supernova; these supernovae occur when white dwarves (the small, dense remnants of stars) consume so much material, often from a neighboring star, that they explode. That distinguishes Typa Ia from Type II supernovae, in which a large star’s core collapses, causing a massive explosion.
From Gizmodo:
In 1996, a rock from space was found in southwestern Egypt’s Great Sand Sea. The rock was odd, even by extraterrestrial standards, and a team of researchers studying the rock’s chemistry now propose that it came from a supernova—the brilliant, explosive collapse of a star.
The rock is named Hypatia, after a 4th-century Egyptian mathematician. Based on the pattern of 15 elements in a 3-gram sample of the stone, a team of researchers suspects Hypatia came from well beyond our stellar neighborhood, and emerged from the gas and dusty detritus that followed a distant star’s explosion. Their research is published in the journal Icarus.
The researchers think Hypatia came from a Type Ia supernova; these supernovae occur when white dwarves (the small, dense remnants of stars) consume so much material, often from a neighboring star, that they explode. That distinguishes Typa Ia from Type II supernovae, in which a large star’s core collapses, causing a massive explosion.
DIYGrandpa shared this project on Thingiverse!
I made this grid to install behind the Apple studio display (VESA mount version). To this grid I am mounting an E27 bulb for visa call lighting (reflecting off my wall) as well as LED strips simply by adding other designs to this grid
Download files: https://www.thingiverse.com/thing:5326574
Every Thursday is #3dthursday here at Adafruit! The DIY 3D printing community has passion and dedication for making solid objects from digital models. Recently, we have noticed electronics projects integrated with 3D printed enclosures, brackets, and sculptures, so each Thursday we celebrate and highlight these bold pioneers!
Have you considered building a 3D project around an Arduino or other microcontroller? How about printing a bracket to mount your Raspberry Pi to the back of your HD monitor? And don’t forget the countless LED projects that are possible when you are modeling your projects in 3D!
DIYGrandpa shared this project on Thingiverse!
I made this grid to install behind the Apple studio display (VESA mount version). To this grid I am mounting an E27 bulb for visa call lighting (reflecting off my wall) as well as LED strips simply by adding other designs to this grid
Download files: https://www.thingiverse.com/thing:5326574
Every Thursday is #3dthursday here at Adafruit! The DIY 3D printing community has passion and dedication for making solid objects from digital models. Recently, we have noticed electronics projects integrated with 3D printed enclosures, brackets, and sculptures, so each Thursday we celebrate and highlight these bold pioneers!
Have you considered building a 3D project around an Arduino or other microcontroller? How about printing a bracket to mount your Raspberry Pi to the back of your HD monitor? And don’t forget the countless LED projects that are possible when you are modeling your projects in 3D!
HGW shares:
Stand for milk frother
Printed in two parts to prevent support.
If you stop the pressure at a height of 7 mm, you can insert 13 nuts in the base to lower the centre of gravity.
download the files on: https://www.thingiverse.com/thing:5326638
Every Thursday is #3dthursday here at Adafruit! The DIY 3D printing community has passion and dedication for making solid objects from digital models. Recently, we have noticed electronics projects integrated with 3D printed enclosures, brackets, and sculptures, so each Thursday we celebrate and highlight these bold pioneers!
Have you considered building a 3D project around an Arduino or other microcontroller? How about printing a bracket to mount your Raspberry Pi to the back of your HD monitor? And don’t forget the countless LED projects that are possible when you are modeling your projects in 3D!
LIVE CHAT IS HERE! http://adafru.it/discord
Adafruit on Instagram: https://www.instagram.com/adafruit
Shop for parts to build your own DIY projects http://adafru.it/3dprinting
3D Printing Projects Playlist:
3D Hangout Show Playlist:
Layer by Layer CAD Tutorials Playlist:
Timelapse Tuesday Playlist:
Connect with Noe and Pedro on Social Media:
Noe’s Twitter / Instagram: http://instagram.com/ecken
Pedro’s Twitter / Instagram: http://instagram.com/videopixil